Products
Deutz-Fahr / SDF
Series 6
6160.4 - 6170.4 PS/RCShift/TTV
6160 - 6170 - 6180 PS/RCShift/TTV
6190 - 6210 - 6230 PS/RCShift
(Stage V)
Front Linkage cat. 2
Lifting power 40 kN (4.0 t) (6160.4 – 6180)
Lifting power 50 kN (5.0 t) (6190 – 6230)
2 double-acting cylinders
Lower links with Walterscheid catch hooks cat. 3 L
Hydraulic conduits with shut-off valve
up to the hydraulic control valve
Reversing valve (double-acting/single-acting)
Spindle-adjusted top link cat. 2
Front PTO
(only for welded Front Console)
Shaft displacement 124 mm (HT)
Shaft speed 1000 rpm, gear ratio i = 1.93
Max. continuous power 110 kW / 150 HP
Electrohydraulically actuated
Incl. complete mounting kit
- Front linkage category 2
- Lifting power at catch hook kN (t) 40 / 50 (4.0 / 5.0)
- Lifting power at implement center of gravity 26 / 33 (2.6 / 3.3)
800 mm from catch hooks kN (t)
- Double-acting cylinders •
- Reversing valve •
- Reversing switch o
- Catch hooks Walterscheid cat. • 3 L
- Top link cat. / thread 2 / M30
- Top link support •
- Front PTO shaft speed/rpm / gear ratio • 1000 / 1.93
o 1000Eco / 1.63
o 1000-1000Eco / 1.88-1.56
o 1000 / 1.93
o 1000Eco / 1.61
o 1000-1000Eco / 1.91-1.61
- Max. PTO power kW (HP) • 147 / (200)
o 100 / (136) Eco
o 147 / (200)
o 147 / (200)
o 147 / (200) Eco
o 176 / (240)
- Max. continuous power kW (HP) • 110 / (150)
o 88 / (120) Eco
o 100 / (136)
o 110 / (150)
o 110 / (150) Eco
o 100 / (136)
- Shaft displacement (mm) • 124
o 124 Eco
o 124
o 186
o 186 Eco
o 186
- PTO shaft profile DIN 9611 – 1 3/8″ – 6 •
- Direction of rotation to the right in driving direction •
• standard version / o on request / – not available
-
-
Municipal mounting plate size 3/5 without further mounting parts for catch hooks width cat. 2
-
-
Municipal mounting plate size 3/5 (VSS-A) without further mounting parts for short lower links / top link
-
-
Mounting kit for municipal mounting plate size 3/5 (VSS-A) with short lower links / top link Sauter and SDF front linkage
-
-
Municipal mounting plate, rigid version size 3/5 (VSS-A) with short lower links / top link, for Sauter and SDF front linkage
-
-
Push rod for Sauter and SDF front linkage
-
-
Fixed municipal mounting plate size 3/5 (VSS-A) with perforated strip
-
-
Extension 125 mm, 155 mm, 185 mm, 215 mm for fixed municipal mounting plate
-
-
Fixed municipal mounting plate size 3/5 (VSS-A)
-
-
Push rod for fixed municipal mounting plate
-
-
Mounting kit with slip-on offset gearbox for fixed municipal mounting plate, only with HT gearbox
-
-
Hooking-in front linkage for municipal mounting plate size 3/5 DIN 76060 and VSS-A plate
-
-
Hydraulic implement relief, more information see downloads
-
-
Spindle-adjusted top link with catch hook
-
-
Telescopic top link
-
-
Auxiliary headlights
-
-
Tractor triangle, more information see downloads
-
-
Push rod
-
-
Holders for mower relief springs
-
-
Front remote
-
-
Hydraulic accumulator
-
-
Pressure gauge kit
-
-
Reversing valve with reducing throttle
-
-
Reversing switch
-
-
Hydraulic pipes at the front double-acting
-
-
Light socket 7 poles
-
-
Light socket 7 poles with plug
-
-
Sauter control from the front (available only for electric control units), more information see downloads
-
-
Comfort control for Sauter control from the front, more information see downloads
-
-
Hydraulic implement relief for comfort control, more information see downloads
-
-
Housing (for two additional buttons)
-
-
Cable set sensor for reversing switch with control from the front
-
-
Frontprotector, more information see downloads
-
-
Ballast support
-
-
Ballast container
-
-
Hydraulic pivot links cat. 2, more information see downloads
All images and technical details are not binding | Images only serve as an illustration and do not correspond to the delivery scope | We reserve the right to change design and function | The Sauter options and municipal programme is not included in the standard delivery scope and it is partly not available for every tractor type.